As children grow, their car seat and restraint system needs evolve to ensure they remain safe on the road. Transitioning car seats from a harnessed car seat to a booster seat is a significant milestone, but understanding the requirements and guidelines for booster seat use is crucial before making the switch. At GoodBuy Gear, we’re here to guide you through these important steps and help you make informed decisions about car seat safety and your kiddo’s safe seat journey.
Rear-Facing Car Seats: The Safest Starting Point
Before transitioning to a booster seat, it’s essential to understand the early stages of car seat safety. A child’s safety journey begins with a rear-facing car seat, which is the safest position for infants and toddlers.
Why Rear-Facing is Safer
Rear-facing car seats provide the best protection for a child's head, neck, and spine by distributing the force of the impact across the entire back of the seat. This minimizes the risk of injury during a crash, especially for children under the age of two, whose neck muscles and bones are still developing.
When to Use a Rear-Facing Car Seat
Children should remain in a rear-facing seat for as long as possible, following these general guidelines:
- Infant Car Seats: Designed for newborns and young babies, these seats have a 3 or 5-point harness and should be used until the child reaches the maximum height or weight limit (usually 30-35 pounds).
- Convertible Car Seats: Convertible seats can be used rear-facing and then switched to forward-facing once the child has outgrown the rear-facing limits. The American Academy of Pediatrics (AAP) recommends keeping children rear-facing until at least 2 years of age, or longer if the seat allows.
Once your child has outgrown their rear-facing seat, they’ll transition to a forward-facing car seat with a harness before eventually moving to a booster seat.
Booster Seat Basics: Why It Matters
A booster seat positions a child so that the vehicle’s seat belt fits correctly across their body. Unlike a forward-facing car seat with a harness, a booster seat relies on the vehicle's lap and shoulder seat belts to secure the child. The booster seat raises the child’s height so that the seat belt rests on their chest and hips, providing maximum protection in case of a crash.
When Does My Child Need a Booster Seat?
Once your child outgrows their forward-facing seat with a harness, it’s time to transition to a booster seat. Here are the general guidelines for when your child should start using a booster seat:
-
Outgrowing the Forward-Facing Car Seat
Your child should transition to a booster seat when they’ve outgrown the height or weight limits of their forward-facing car seat, typically between 5 and 7 years of age. Most forward-facing seats have weight limits between 40-65 pounds and height limits of 49 inches, but always check your car seat’s manual and manufacturer’s instructions for specifics. -
Age and Size Requirements
According to the National Highway Traffic Safety Administration (NHTSA), children should use a booster seat until they are at least 8-12 years old or until they reach 4 feet 9 inches in height, which is when most children can safely use a seat belt alone. -
When in Doubt, Check for Proper Seat Belt Fit
Your child should not transition to a booster seat until proper child restraint can be achieved. A proper safety belt fit means: - The lap belt lays across the upper thighs, not the stomach.
- The shoulder belt crosses the chest and shoulder, not the neck or face.
- The child can sit back against the vehicle seat with their knees bent at the edge of the seat.
Types of Booster Seats
There are two main types of booster seats:
- High-Back Booster: Offers additional support for the child’s back and neck and is ideal for vehicles without headrests or with low seatbacks. High-back boosters also provide side-impact protection, adding another layer of safety.
- Backless Booster: More compact and portable, backless boosters are best used in vehicles with adequate head and neck support.
If you child is slouching, skip the backless booster and opt for a high-back booster to help maintain proper posture and therefore a safe fitting seatbelt.
Booster Seat Installation in Motor Vehicles
Ensuring that your child's booster seat is correctly installed in your vehicle is just as important as choosing the right seat. Proper installation maximizes the seat’s safety features and protects your child in case of an accident. Here’s a step-by-step guide to make sure your booster seat is installed correctly and safely:
- Choose the Right Position in the Vehicle: The safest place for any child in a vehicle is the back seat—never the front seat—away from active airbags. If possible, position the booster seat in the middle of the rear seat, which offers the most protection during side-impact collisions.
- Review Weight Requirements: Always double check the booster seat’s weight requirements and limits so that you’re complying with the seat’s safety standards.
- Check the Booster Seat’s Fit in the Vehicle: Before using the booster seat, test how it fits in your car. The booster seat should sit flat on the vehicle’s seat, without tipping or wobbling. If your vehicle’s seat has a deep contour or incline, make sure the booster seat still allows for the proper positioning of the seat belt on your child. For high-back boosters, ensure that the back of the booster sits flush against the vehicle seat, providing additional head and neck support. Backless boosters should only be used in vehicles with headrests that reach at least the top of the child’s ears.
- Use the Vehicle’s Lap and Shoulder Belts: Booster seats are designed to be used with the vehicle’s lap and shoulder belts — not just the lap belt alone. Here’s how to properly position the seat belt:
- Lap Belt: The lap belt should lie flat across your child’s upper thighs, not the stomach. A lap belt across the stomach can cause severe internal injuries during a crash.
- Shoulder Belt: The shoulder belt should cross the middle of your child’s chest and rest comfortably on their shoulder. It should never cross the neck or face. Make sure the shoulder belt stays in position and doesn’t get tucked behind the child’s back or arm, as this reduces its effectiveness.
Other Booster Seat Safety Best Practices
- Secure the Booster Seat When Not in Use: Even if your child isn’t in the booster seat, it’s important to keep it properly secured in your vehicle. A loose booster seat can become a dangerous projectile during a sudden stop or crash. When your child isn’t in the seat, make sure the seat belt is fastened around it, or store the booster seat in a secure location.
- Regularly Check Installation: Car seat installation isn’t a one-time task. Over time, seats can shift, and children can outgrow the positioning. Regularly check that the booster seat remains correctly installed and that the seat belt fits properly as your child grows.
- Consult Your Car’s Manual and Booster Seat Instructions: Every car is different, and each booster seat model has unique instructions. It’s important to review both your vehicle owner’s manual and the booster seat’s installation guide to ensure you’re using the child safety seat correctly. Some vehicles may have specific guidelines for booster seat placement or seat belt use that could affect how you install the booster seat.
- Educate Your Child: Educated kids create safe kids. Teach your child the importance of keeping the seat belt properly secured throughout every card ride. Stress the importance that the child seat tether is never played with, and regularly check that they haven’t adjusted it incorrectly. Lastly, caregivers should always wear their adult seat belt to prioritize their own safety and demonstrate safe car ride habits.
Booster Seat Laws and Recommendations
Booster seat laws vary by state, but most states require children to use a booster seat until they are at least 8 years old or 4 feet 9 inches tall. Some states have stricter regulations, so it’s essential to check your local laws. The American Academy of Pediatrics (AAP) recommends keeping children in a booster seat until they can safely use the vehicle’s seat belt, which may be later than state law requires.
Many communities offer car seat inspection services and safety tips through local fire stations, police departments, or child passenger safety technicians. These experts can help you verify that your booster seat is installed correctly based on your car seat manufacturer and make/model of your motor vehicle. Check for inspection events or certified car seat technicians in your area, especially during Child Passenger Safety Month every September.
By understanding booster seat requirements and using a rear-facing car seat for as long as possible, you can ensure your child is safe during every stage of their car seat journey.
At GoodBuy Gear, we offer a wide selection of new, open box and quality used car seats, from rear-facing infant seats to booster seats, ensuring you find the perfect fit for your child’s needs. Our gear experts and in-house child passenger safety technician (CPST) can guide you through each stage of your child’s car seat journey, from newborn to big kid.